Home›Knowledge›Steel Erection Sequence

🔗 Sequenceconstruction

Steel Erection Sequence

Updated Mar 26, 2026

Structural steel erection follows: 1) Anchor bolt survey and verification, 2) Column erection with temporary bracing, 3) Beam/girder placement, 4) Plumbing and alignment, 5) Connection bolting/welding, 6) Metal deck installation, 7) Shear stud welding, 8) Permanent bracing, 9) Touch-up fireproofing.

TAGS

steel erection structure sequence bolting

DETAILS

phase

BUILD

category

Structure — Steel

duration

2-8 weeks typical

successor

Metal deck → concrete slab

predecessor

Foundation complete + anchor bolts verified

critical holds

["Anchor bolt survey","Connection inspection","Fireproofing"]

RELATED KNOWLEDGE

Foundation → Framing Sequence (Hold Point: Foundation Inspection)

Framing cannot begin until foundation inspection passes. Concrete must achieve minimum 75% design strength before loading. Foundation inspection is a hard hold point in every jurisdiction.

Rough MEP → Insulation Sequence (Hold Point: Rough-In Inspection)

Insulation and drywall cannot begin until rough mechanical, electrical, and plumbing inspections pass. All three trades must complete rough-in and be inspected before walls can be closed.

IBC Section 1107 — Accessible Unit and Dwelling Unit Elements

Requires accessible common use elements within individual residential units.

IECC Section 603 — Energy Cost Budget Method

Provides performance-based alternative to prescriptive energy code requirements.

Drywall → Paint/Finishes Sequence

After drywall hung and taped: prime, texture, paint. Flooring after paint (or protect if before). Cabinets after drywall, before countertops. Trim/millwork after paint. Final clean before CO inspection.

NFPA 99 — Health Care Facilities Code

Comprehensive code for safety systems in hospitals and medical facilities.

← Back to Knowledge Garden