Home›Knowledge›Wide Flange Steel Beams (W-Shape)
🧱 Materialconstruction

Wide Flange Steel Beams (W-Shape)

Updated Mar 26, 2026
Hot-rolled wide flange structural steel shapes per ASTM A992 (50 ksi yield). Primary structural member for steel frame buildings. Common sizes: W8x10 to W36x300. H-shaped cross section for efficient bending resistance.
TAGS
steelstructuralbeamW-shapeframe
DETAILS
standard
ASTM A992
cost per lb
$0.90-$1.60
csi division
05
yield strength
50 ksi
sustainability grade
B
RELATED KNOWLEDGE
🧱 Material
Concrete — 4,000 PSI Normal Weight
Standard structural concrete mix with 4,000 psi compressive strength at 28 days, 150 pcf unit weight. Most common mix for foundations, slabs, columns, and beams in commercial and residential construction.
🧱 Material
Structural Steel — ASTM A992 (W-shapes)
Standard structural steel for wide-flange shapes (W-beams, W-columns). 50 ksi yield strength, 65 ksi tensile strength. The dominant steel grade for structural framing in commercial construction.
📋 Code
IBC Section 1107 — Accessible Unit and Dwelling Unit Elements
Requires accessible common use elements within individual residential units.
🧱 Material
Lumber — SPF 2x4 Stud Grade (Spruce-Pine-Fir)
Standard dimensional lumber for wall framing. Actual dimensions 1.5 x 3.5 inches. Available in 8, 10, 12, 16 foot lengths. Stud grade meets IBC requirements for bearing walls up to 10 feet.
🧱 Material
Romex NM-B 12/2 — Non-Metallic Sheathed Cable (Residential Wiring)
Standard residential electrical wiring: 12 AWG copper, 2 conductors + ground, NM-B rated. For 20-amp circuits. Used for kitchen, bathroom, laundry, garage receptacles per NEC. Interior dry locations only.
🧱 Material
Gypsum Board — 5/8" Type X (Fire-Rated)
Fire-rated gypsum wallboard providing 1-hour fire resistance when applied to each side of a wood or steel stud wall. Required by IBC for fire-resistance-rated assemblies. 4x8 and 4x12 sheets standard.
← Back to Knowledge Garden