Home›Knowledge›Vinyl Siding — Double 4 in Clapboard
🧱 Materialmaterialscladding

Vinyl Siding — Double 4 in Clapboard

Updated Mar 25, 2026
Most popular US residential exterior cladding. Maintenance-free, 30+ colors.

ASTM D3679. 0.040-0.046 in thick. Wind 110 mph standard, 150+ premium. No painting needed. 1/4 in expansion allowance. Cost $2-$5/sf material, $4-$9/sf installed. 20-40 year lifespan. ~27% US market share. CSI 07 46 19.

TAGS
vinylsidingcladdingexteriorresidential
DETAILS
standard
ASTM D3679
cost per sf
$2-$5 material
csi division
07 46 19
installed cost range
$4-$9/sf
sustainability grade
D
RELATED KNOWLEDGE
🧱 Material
Concrete — 4,000 PSI Normal Weight
Standard structural concrete mix with 4,000 psi compressive strength at 28 days, 150 pcf unit weight. Most common mix for foundations, slabs, columns, and beams in commercial and residential construction.
🧱 Material
Structural Steel — ASTM A992 (W-shapes)
Standard structural steel for wide-flange shapes (W-beams, W-columns). 50 ksi yield strength, 65 ksi tensile strength. The dominant steel grade for structural framing in commercial construction.
🧱 Material
Lumber — SPF 2x4 Stud Grade (Spruce-Pine-Fir)
Standard dimensional lumber for wall framing. Actual dimensions 1.5 x 3.5 inches. Available in 8, 10, 12, 16 foot lengths. Stud grade meets IBC requirements for bearing walls up to 10 feet.
🧱 Material
Romex NM-B 12/2 — Non-Metallic Sheathed Cable (Residential Wiring)
Standard residential electrical wiring: 12 AWG copper, 2 conductors + ground, NM-B rated. For 20-amp circuits. Used for kitchen, bathroom, laundry, garage receptacles per NEC. Interior dry locations only.
🧱 Material
Gypsum Board — 5/8" Type X (Fire-Rated)
Fire-rated gypsum wallboard providing 1-hour fire resistance when applied to each side of a wood or steel stud wall. Required by IBC for fire-resistance-rated assemblies. 4x8 and 4x12 sheets standard.
🧱 Material
Reinforcing Steel — Grade 60 Deformed Bar (#4 through #11)
Standard reinforcing steel for concrete construction. 60,000 psi yield strength. Deformed surface for bond with concrete. Used in foundations, slabs, columns, beams, and walls. Specified per ACI 318.
← Back to Knowledge Garden