Home›Knowledge›ASCE 7 Chapter 0 — Scope and Definitions
📋 Codeconstruction

ASCE 7 Chapter 0 — Scope and Definitions

Updated Apr 3, 2026
Establishes scope, purpose, and key definitions for the loads standard.

ASCE 7 Chapter 0 defines the scope as applicable to buildings, structures, and nonbuilding structures. Buildings include residential, commercial, industrial, and institutional structures. Load combinations and safety factors ensure adequate strength for various loading scenarios. Definitions establish terminology used throughout the standard including terms like 'occupancy category' and 'seismic design category'.

TAGS
asce7scopedefinitions
DETAILS
section
Chapter 0
category
General
code body
ASCE
code year
2022
RELATED KNOWLEDGE
📋 Code
IBC 903.2.1 — Group A Occupancies (Sprinkler Requirements)
Automatic sprinkler system required throughout buildings with Group A occupancy where fire area exceeds 5,000 square feet, or overall building area exceeds 12,000 square feet, or occupant load of the fire area exceeds 300.
📋 Code
IBC 903.2.7 — Group M Occupancies (Retail Sprinkler Requirements)
Automatic sprinkler system required in Group M (mercantile) occupancies where fire area exceeds 12,000 square feet or building is more than three stories above grade.
📋 Code
IBC 903.2.11.3 — Buildings 55 Feet or More in Height
Automatic sprinkler system required throughout buildings with a floor level having an occupant load of 30 or more that is located 55 feet or more above the lowest level of fire department vehicle access.
📋 Code
IBC 1015.1 — Exit and Exit Access Doorways Required
Two exits or exit access doorways required from any space where occupant load exceeds the table values. Spaces with occupant load exceeding 500 require a minimum of 3 exits. Spaces exceeding 1,000 require 4 exits.
📋 Code
IBC 1017.2 — Exit Access Travel Distance
Maximum travel distance from any point in a building to an exit shall not exceed 200 feet unsprinklered or 250 feet sprinklered for most occupancies. Specific occupancies have modified limits.
📋 Code
IBC Table 601 — Fire-Resistance Rating Requirements
Specifies minimum fire-resistance ratings for structural elements based on construction type (Type I through V). Type IA requires 3-hour rated structural frame, 2-hour floors, and 1.5-hour roof.
← Back to Knowledge Garden