Home›Knowledge›IRC Section E3701 — Grounding and Bonding

📋 Codeconstruction

IRC Section E3701 — Grounding and Bonding

Updated Apr 3, 2026

Establishes electrical grounding to protect occupants from shock and equipment from damage.

Section E3701 requires grounding of all electrical systems and equipment. A ground rod driven into the earth provides a low-resistance path for fault current. The service entrance provides a grounding connection. All metal equipment frames and conduit are bonded together to prevent shock. Ground-fault circuit interrupter (GFCI) protection in wet locations (bathrooms, kitchens) provides rapid disconnection if a fault occurs.

TAGS

irc grounding bonding

DETAILS

section

E3701

category

Electrical

code body

IRC

code year

2021

RELATED KNOWLEDGE

IBC 903.2.1 — Group A Occupancies (Sprinkler Requirements)

Automatic sprinkler system required throughout buildings with Group A occupancy where fire area exceeds 5,000 square feet, or overall building area exceeds 12,000 square feet, or occupant load of the fire area exceeds 300.

IBC 903.2.7 — Group M Occupancies (Retail Sprinkler Requirements)

Automatic sprinkler system required in Group M (mercantile) occupancies where fire area exceeds 12,000 square feet or building is more than three stories above grade.

IBC 903.2.11.3 — Buildings 55 Feet or More in Height

Automatic sprinkler system required throughout buildings with a floor level having an occupant load of 30 or more that is located 55 feet or more above the lowest level of fire department vehicle access.

IBC 1015.1 — Exit and Exit Access Doorways Required

Two exits or exit access doorways required from any space where occupant load exceeds the table values. Spaces with occupant load exceeding 500 require a minimum of 3 exits. Spaces exceeding 1,000 require 4 exits.

IBC 1017.2 — Exit Access Travel Distance

Maximum travel distance from any point in a building to an exit shall not exceed 200 feet unsprinklered or 250 feet sprinklered for most occupancies. Specific occupancies have modified limits.

IBC Table 601 — Fire-Resistance Rating Requirements

Specifies minimum fire-resistance ratings for structural elements based on construction type (Type I through V). Type IA requires 3-hour rated structural frame, 2-hour floors, and 1.5-hour roof.

← Back to Knowledge Garden